ServicesBrandsService AreaAboutContactCall (888) 482-7007
Serving Santa MonicaLos Angeles County

Washing Machine Repair in Santa Monica, CA

Santa Monica water is very hard, and on a washer that shows up as scale on the inlet valve, the heating element and the pump seal. We check water pressure and fill volume before anyone condemns a control board, because in this city the board is rarely the problem.

Price in writing first
Warranty on parts and labor
Open 7 days, 6am to 12am
Technician repairing a front load washing machine in a California laundry room
1 visitMost repairs finishedWasher
Los Angeles CountyOne number, one team
1 visit
Most repairs finished
Will not drain or spin
Most common call
10 to 13 yrs
Typical service life
7 days
Open
What it is telling you

What a washer is telling you.

Full of water and will not drain

The drain pump has stopped, or something is stopping it. On front loaders a coin, a hair tie or a sock in the pump filter is the first thing we check. After that the pump itself, a kinked or clogged drain hose, or a control that never sent the pump the signal. A washer that drains but will not spin has usually lost its lid lock, door lock or shifter actuator, because the control refuses to spin a drum it cannot confirm is locked.

Loud spin, thumping, or walking

A roar on high spin that gets worse every month is drum bearings, and on a front loader the seal that protects them has usually let water in. A thump on every rotation is a suspension rod, a damper or a loose counterweight. A machine that walks across the floor has lost its suspension or was never leveled. Bearings are a real job. The rest is usually a single visit.

Leaking, or filling slowly

Water at the front of a front loader is the door boot, torn or holding a foreign object in its fold. Water at the back is a supply hose, an inlet valve or the drain hose. A machine that fills slowly or shows a fill error on a hard water supply often just has scaled inlet screens, which is a fifteen minute fix. A machine that fills and never stops has a stuck valve or a pressure switch fault.

Local conditions

Why a washer in Santa Monica fails the way it does.

Santa Monica water is very hard, and scale is abrasive: it works on the door seal and the pump seal every cycle and it narrows the inlet valve. Hardness is also far from uniform here. The city does not draw everything from one place, and readings run from around 5 grains in some parts of town to about 48 in others. Two homes a few miles apart can genuinely be on different water and scale up at different rates, which is why a neighbor's experience with the same model is not a reliable guide to yours. Age of the plumbing compounds it. About 75 percent of homes here predate 1980, and older supply lines and shutoffs hold scale that keeps feeding an appliance after the appliance itself has been cleaned up.

Laundry hookups in older Santa Monica homes are part of the diagnosis, because a washer cannot fill or drain properly through valves and a standpipe that predate it. About 75.0 percent of homes here predate 1980, and the supply valves and standpipes of that era were sized for a different machine, so the house side is checked before the washer is opened.

What we repair

What we repair on washers.

Front load, top load, stacked and all-in-one, every major brand.

  • Drain pumps, pump filters, drain hoses and check valves
  • Lid locks, lid switches, door locks and door latch assemblies
  • Shifter actuators, motor couplings, clutches and drive belts
  • Drum bearings, tub seals, spiders and drive shafts
  • Suspension rods, dampers, springs and counterweight hardware
  • Inlet valves, pressure switches, hoses and water level sensors
  • Door boots, gaskets, hinges and door glass
  • Control boards, user interfaces, motor controls and wiring
Straight pricing

What washer repair costs in Santa Monica.

Typical washer repair price ranges by job
Typical jobWhat usually causes itTypical range
Will not drainDrain pump, filter obstruction or the hose$160 to $450
Will not spinLid lock, door lock, motor coupling or a shifter actuator$160 to $450
LeakingDoor boot, inlet valve, hose or a pump seal$160 to $450
Loud spin, walking across the floorDrum bearings, suspension rods or dampers$160 to $450
Will not fill or fills slowlyInlet valve, pressure switch or scaled inlet screens$160 to $450

The diagnostic visit is $89. The whole repair is quoted in writing before any work, you approve it first, and the fee is credited to the job when you go ahead.

Straight numbers for Santa Monica: $89 to diagnose, credited to the repair, and a typical washer job between $160 and $450. Anything outside that range is quoted before the work, never after.

Santa Monica washer questions

What people here ask before they call.

The honest range for Santa Monica is $160 to $450 for the common faults, and the $89 diagnostic fee comes off the repair when you approve it. In Santa Monica the water is very hard, and a scaled inlet valve is one of the cheapest repairs on the list, which is good news because it is also one of the most common here. No repair starts without your approval on a written price. One call to (888) 482-7007 gets a Santa Monica technician scheduled, usually the same day.

Most days, yes. A Santa Monica washer call gets a same-day window whenever the Los Angeles County schedule allows, and it usually does. Calls from Santa Monica and Los Angeles are usually run by the same technician on the same day, which is one reason the wait here is short. Call (888) 482-7007. Tell us the cross street and what the washer is doing, and we will tell you when.

Every repair leaves with a warranty on the parts and the labor, in Santa Monica as everywhere we work, and the terms are in writing before you approve anything. Genuine parts are part of the reason we can stand behind the work: an aftermarket pump or valve is where a repeat failure usually starts. Ask for the terms when you call (888) 482-7007; they are on the quote before you approve a dollar of work.

Count on ten years or so, with the drum bearings deciding the upper end and the pump, the switches and the valves deciding how many small repairs you meet along the way. What shortens the life is overloading and too much detergent: an overloaded drum hammers the bearings, and excess suds leave residue that holds moisture against the seals. Call (888) 482-7007 for a $89 diagnostic and an honest read on how much life is left.

Usually, yes, and the arithmetic is simple: if the repair costs less than half of a comparable new machine and the drum bearings are quiet, repair wins in Santa Monica as it does everywhere. Age is a poor guide on its own. A washer that has run ten years and needs a pump will run several more; one whose drum growls on spin is telling you something different. Call (888) 482-7007 before you shop. A $89 diagnosis is the cheapest way to find out whether you need a new washer or a new pump.

Where we work

Washing Machine Repair across Santa Monica.

Washing machine repair anywhere in Santa Monica, across all 5 ZIP codes, from a technician who works the area every week.

9040190402904039040490405

Not sure if we reach you?

Tell us the cross street. We will tell you the time window in about ten seconds.

Call (888) 482-7007
Also in this city

Everything else we fix in Santa Monica.

One number for every major appliance, freestanding or built in.

Ready when your washer is not.

A technician who works Santa Monica every week, common parts on the truck, and a quote you approve before the first panel comes off.

Call (888) 482-7007